Forums

Comments

I have a label on all my cornies.... will the BB be able to 'overcome' the edge of the label?

The indicator bead should work just fine with labels. Our kegs have the clear plastic labels from the vendor and we've never experienced any issues. If you send a picture of the kegs, we could let you know for sure.

Does the ball inside need to be so big? I feel like it would tough to fit into a full keg? Do you make a smaller one?

After our first month, we switched production to a 2" diameter ball and it is noticeably smaller and more durable. Only a 1/2" of the ball is exposed above the fluid line. That should fit within the headspace of the keg under any situation.

I keg exclusively in Sankey Kegs. Do you, or will you ever, produce a float small enough to fit in a Sankey Keg?

We don't have one at this time, but we have been asked. Our Patent would cover that device as well, so we will look into it once we get settled with the current product.

I fill my kegs with a CO2 push from my conical. Can I sanitize and place the float in the keg (which would then be purged with CO2) before filling?

That is no problem. Purge with CO2 and fill as normal. After it is filled, "find" the float with the black disc locator magnet, making sure the orange side is on the keg. You might want to practice this a couple times with the keg open and filled with water before you close it up. It's a little more difficult when you can't see the float. We can usually find it in a few seconds, but we've done it quite a few times. We recommend that you leave the magnet on the keg while you move it and only add the indicator bead once the keg is in position in your kegerator or keezer.

Hi,I use a clear beer keg system which uses a metal or aluminum float. Will this cause an issue with the floating ball/magnet?

We've had quite a few customers tell us it works with a variety of hop canisters within their keg so we don't think this should be a problem. You would want to keep the black capture magnet attached to the keg and float inside until you get the keg in place and hooked up in your cooler. That would lessen the likelihood that the clear beer float would dislodge the level indicator float. Let us know how it works for you! Thanks

Is the magnet strong enough to hold a float while I turn my keg on the side and 4 CO2 are rolling it back and forth for 10 minutes. Thanks

The magnet would not hold the float while you carbonate the keg in this manner. However, after it is carbonated, you can "find" the float with the black disc locator magnet without re-opening the keg. You might want to practice this a couple times with the keg open and filled with water before you close it up. It's a little more difficult when you can't see the float. We can usually find it in a few seconds, but we've done it quite a few times. We recommend that you leave the magnet on the keg while you move it and only add the indicator bead once the keg is in position in your kegerator or keezer.

Surprised this hasn't been asked. It seems like when moving kegs around (adding a new one to the fridge for example), it will be fairly easy to knock the little orange ball off. Should that happen, is it easy enough to get it reattached to get the system working again?

Good question. You can potentially knock the bead loose if you hit it with another keg or a hose while moving things. If your Kegerator or Keezer is tight on space, we recommend that you simply re-attach the black locator magnet to the keg that may get bumped. That way you cannot knock it off and you can easily re-apply the orange bead after you are done moving things around. If you do knock one off, you can find it again. It is easier to find the float if you know the general level of the liquid in the keg.

I force carbonate at 30 psi. It appears that the float is a sealed ball, will it deform under pressure?

The float is designed to operate at all normal force carbonation pressures. 30 to 50 psi is not an issue. Thanks

I bought some of these for use when filling kegs. I'd like to know when a keg is almost full before beer comes shooting out of the pressure relief valve. Unfortunately this system doesn't work so well for that purpose. The ball doesn't drag the bead up with it and eventually the bead just falls off. Do you know of any way that I can make that work?

We do make one for that option now. It works nicely for filling and draining. Shoot us an email and we will work out the order. Thanks

How precise is the movement and how big is the bead? I want to be able to measure exactly how much beer I've got in the keg after racking from the fermenter. Do you think I'd be able to measure to +/-50ml?

The indicator bead is 1/4" diameter. 50 ml is probably too tight to guarantee a measurement. I would say 250 ml is more reasonable, roughly one half of a standard size beer.

Add new comment

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.